This SET Deer consists of 2x Step by Step Airbrush Stencils and 1x Wallstencil: AS-354, AS-359 und W-716 Size of Motifs:S: ca 21 cm x 15 cm =   approx 8.26 inch x 5.90 inchM: ca 30 cm x 21 cm = approx 11.81 inch x 8.26 inch L: ca 42 cm x 30 cm = approx  16.53 inch x 11.81 inch Step by step stencils for quick and easy application of motifs on straight and slightly curved surfaces. The steps are applied and sprayed one after the other - in contrast to freehand stencils, this gives you a complete motif - in full color splendor with shadow and highlight effects. Instructions with a short description are included with the stencil.The stencil is laser-cut from 0.2 mm thick, milky white film. The film is slightly solvent-resistant, can be cleaned with cleaner and is compatible with all common types of paints and colorants.

Das SET Wolf/ Berge besteht aus 3 Step by Step Airbrush Schablone und 1 Wandschablone AS-001, AS-027, AS163 und W-716 Bildgrößen:S ca 21 cm x 15 cm =   approx 8.26 inch x 5.90 inchM ca 30 cm x 21 cm = approx 11.81 inch x 8.26 inch L ca 42 cm x 30 cm = approx  16.53 inch x 11.81 inch Step by Step Airbrushschablonen zum einfachen und schnellen aufsprühen von Motiven auf geraden und leicht gewölbten Oberflächen. Die Schritte werden nacheinander aufgelegt und gesprüht - dadurch erhalten Sie im Gegensatz zu Freihand-Schablonen ein komplettes Motiv - in voller Farbpracht mit Schatten- und Highlighteffekten. Anleitung mit einer kurzen Beschreibung liegt der Schablone bei.Die Schablone wird aus 0,2 mm dicker, milchig-weißer Folie gelasert. Die Folie ist leicht Lösungsmittelresistent, kann mit Reiniger gesäubert werden und verträgt alle gängigen Arten von Farben und Farbmitteln.

The texture/structure stencil is ideal for backgrounds and structures such as skulls, knight's armor, or splashing water from ocean waves. Use it as a background, for a drip effect, and much more. Just give it a try; you can freely choose the color your project needs. Step-by-step airbrush stencils for quick and easy spraying of motifs onto straight and slightly curved surfaces.The steps are applied and sprayed one after the other – unlike freehand stencils, this gives you a complete motif in full color with shadow and highlight effects. Instructions with a brief description are included with the stencil. The stencil is laser-cut from 0.2 mm thick, milky-white foil. The foil is slightly solvent-resistant, can be cleaned with cleaner, and is compatible with all common types of paints and colorants. Translated with DeepL.com (free version)